Showing posts with label waveski. Show all posts
Showing posts with label waveski. Show all posts

Wednesday, August 23, 2017

Surf: NH Summer Surfing Redeemed (sort of)

OK, so anyone who read my rant Why New Hampshire Summer Surfing Sucks knows that in June I swore I wouldn't hit the waves again until the fall. Well, I caved (what can I say? My wave jones got the better of me 😏). I recently took a couple of cracks at catching some waves, with mixed results. My first try (about a week ago) was on a sunny day with plenty of bathers in the water, lots of board surfers (many of whom do not practice surf etiquette - even among themselves), and various other yahoos playing in the surf (I actually saw one guy trying to ride waves with a giant inflatable lobster πŸ˜’). I was careful to stay out of the "no surfing" zone, which has been made much more identifiable at my local break by signs with arrows designating where the surfers are not allowed (this was probably done more for the benefit of non-surfers, as surfers usually understand the flags alone). Of course, this doesn't mean any non-surfers are going to pay attention to the signs.They're not excluded, by any means, from the "surfing allowed" areas, but they should be aware of the risks. From my observations, they typically aren't. I had to pull off many waves to avoid running into bather's heads bobbing in the water. That said, I knew ahead of time this would be the scenario, so I made the best of it, and managed to catch a few decent shore break waves.


Walden Milo waveski
The author surfing his Walden "Milo" earlier in the season

My second attempt was much more successful. Conditions were aligned such that everything was in the surfer's favor. The tide was inbound at dawn, with a few hours left before high tide. The skies were overcast, so beach attendance was minimal - especially that early in the morning. The waves were a little better than typical for this time of year, and some were bigger than had been forecast. I wore my full 3|2 wetsuit, which would have been too hot if the sun was out, but was perfection with the low 60's F water temperature. The water was at that perfectly refreshing temperature that makes you glad to be alive, and glad to be in the waves. The only down side relative to fall conditions was that it was a Saturday, and the waves were crowded. They will be much less crowded as water temperatures cool in October and November. In the section I was surfing, though, everybody seemed to click in that wordless understanding that allows surfers to share waves and not hurt each other. Etiquette was mostly followed, and over the hours, we each got the feel for what the strange but increasingly familiar faces gliding past would do. It's also good to re-establish my waveski (see my post What's That Thing Called?) in the lineup and to show fellow surfers that I generally know what I'm doing, and that I belong there. By about 10:00, though, I was ready to call it quits as the late risers paddled out, and I felt like I was practically rubbing shoulders with the "boardies".  

I caught a bunch of decent shore breakers that day, both lefts and rights. The rides weren't exceptionally long, as the waves were closing out faster than I would have liked. It took a little while for them to clean up too. They were pretty choppy and difficult to position at first. They cleaned up a bit as the tide rolled in and the light came up, which was welcome. I was particularly happy with a left where I was barely hanging on to the steep face, and actually found myself in a mini-curl before it closed out. I was sure I was headed for a tumble as I held my rail edge just onto the wave face, but I managed to hold it together and slide out the end and over the shoulder. A waveski can be a lot like riding in a go-cart; you're so close to the surface, it increases your perception of the speed you're going. I mentioned this to a friendly dread-locked board surfer who asked me about the 'ski - I get a lot of interest in the busier warm water months. Some of these surfers haven't seen me before. During the cold water months, I get a lot of "hello"s from more hard core surfers who recognize me.  

All in all, I felt much better about summertime conditions in the local waves - but again, this was a specific and unusual situation. For there to be little in the way of beach attendance on a Saturday in August is a happenstance that is few and far between in these parts.

I'm still looking forward to watching ducks fly south as I wait for the next set, but for now, I feel better about New Hampshire summer surfing (except for the inflatable lobster - really? πŸ™ˆ).

- TB on the Water

   

    

Wednesday, March 8, 2017

Gear: What's That Thing Called? (it's a waveski)


TB on the Water Waveski Surfing
The author surfing his trusty Walden "Milo" waveski 

Several years ago my paddling buddy, Tim, picked up a used "rodeo" boat (a river kayak about 7-8 feet long with a flat planing hull on the bottom) with the idea of surfing it on ocean waves. Tim and I had run into some wave action on sandbars a few times while paddling our touring kayaks, and had made attempts to "surf" some small waves, but quickly realized the length and rounded hull shape did not work well on wave faces. It's not that you can't surf a touring kayak. I've seen it done - but you need expert paddle bracing technique and total control of your boat to be competent on any sizable waves. Not to mention, if you screw up and go nose first into the sandy bottom with a touring boat, you could drive your legs forward, into the hull, and severely injure yourself - or, you know, drown.
Shortly after Tim got his rodeo boat, I found a smaller "squirt" boat - another flat bottomed river kayak, but shorter, with more defined rails (the sharper edges you find on surfboards and SUPs). Mine even came with three fin boxes underneath, and a tri-fin (thruster) set-up designed for surfing waves. We thought we were all set to expand our paddling adventures onto breaking wave faces. Boy, did we have a lot to learn.

Our first attempt to surf waves was with the kooky notion that we could head out in surf pumped up by an offshore hurricane (not very bright on our part). We thought we could just stay on the inside and play in the shore break - not realizing this is the precise section that would hammer us into the sand. I realized pretty quickly that my paddling skills were not up to the task, but Tim faired a little better in punching out past the immediate beach break. As you might imagine, we did not have much success - but fortunately, no one got injured.
   
I think it was the second time we went out that I managed to paddle past the initial shore break, and tried to surf a wave. I found myself upside down, under water, attempting to learn how to roll my squirt boat to the upright position - in breaking waves. The moment of temporary panic when you realize your access to air will not come without effort and problem solving is not a heartening feeling. I could feel my stomach drop - even as I was upside down with my squirt boat floating like a cork above me. And, I knew I was on my own. Even if Tim saw me (he wouldn't have heard me shout because I could not get my head above water), there probably wouldn't have been enough time for him to get to me. Fortunately, I was able to peel myself out of the tight cockpit, and come up for air. I knew right then and there, though, that I would never attempt to surf a closed hull boat again - at least on purpose.  

So, I started investigating SOT (sit-on-top) options - to see if there was anything designed for surfing. Sure enough, there was. There are two basic types of SOT surf specific kayaks: SOT surf kayaks (like the Cobra Strike, Perception Five-O, Malibu 3.4, etc.) and something called a "waveski". At first I couldn't tell the difference much, but the Youtube videos of waveskis in action sure looked like fun. They seemed to have a larger, almost bulbous rear end (designed for catching wave energy), and the rocker (the curved angle of the planing hull you see on surfboards) looked more pronounced (this helps with turns, and lessens the chance of "pearling", which I describe in my post An Unexpected Adventure ). Here's a video of the incredibly talented Hugues Termeau waveski surfing the famous left at Mundaka near Bilbao in the Basque country of northern Spain.







I turned to my trusty Craigslist search for used equipment, and miraculously found one near me that was an "old school" hollow plastic model that has been my go-to surf boat to this day (you can see it on my post Kayak Repairs That Last ). The first time I took it out, I realized the safety factor had just increased exponentially (this recognition caused me to switch my touring kayak to an SOT model a couple years later). It was still a challenge to learn how to surf it, to control it competently, and to establish myself among the lineup of board surfers - who still sometimes look at me sideways (at least until they see that I can actually surf the thing).  

As surfing all over the world has become more popular, even in New England where I catch what waves I can, the water is full of newbies trying to learn. They tend to be a little friendlier than grizzled surf veterans, so they'll often ask me, "what's that thing called?" when they see me on my "goat boat" (a pejorative term coined by board surfers) . Now that I have been surfing some of the breaks for a number of years, even the competent surfers will strike up a conversation - mostly to ask a similar question or to say "that looks like fun". Either way, when I reply that yes, it can be fun, and that it is called a waveski - I might just as well have arrived from outer space with something they've never seen before (even though mine is like, 15 years old). Waveskis have been surfed in Australia, South Africa, Portugal, Ireland, France, northern Spain (you get the picture) for many years. World championships are held - sometimes even here in the U.S. Island Waveski in Cocoa Beach, Florida manufactures waveskis, and so does Infinity Surfboards in Dana Point, California. The state of the art waveskis these days are shaped and built much like surfboards, with similar materials. They are light, fast, and agile - and take some learning to use properly, as I discovered on a used RTM Slide I picked up on Craigslist. My plastic Walden Milo is heavy and slow to get going, but surfs pretty damn well once it's on the wave.

The perception most often seems to be that a waveski (or SOT surf kayak) is easier than board or SUP surfing. It is, in that the "pop up" to the standing position is not required, but it is not, in that balance is still required (only, at the hips instead of the legs), you cannot fall over the back of a wave to disengage with it (once you're on the face - you're in front for good most often), and you cannot "duck dive" on the way out. Paddle technique, learning how to stay with your boat in the case of a wipe-out, learning how to cut the rail into a wave face by shifting your weight - these can all be challenging.

I have found the experience of waveski surfing to be rewarding. I've had my share of wipeouts, lost my boat a couple of times to see it wash up on shore, gotten tumbled (Charlie Brown missing the football style) a bunch of times, overestimated my capabilities in big surf, gotten caught in rip currents, had gear break - you name it. I've also caught glassy waves, big, powerful waves, waves that seemed to go on forever, waves in spots that nobody else seems to know about, and waves that just made me laugh or shout out loud from the sheer joy of them. I've also sat peacefully, looking to the east as the morning sun rose higher from the horizon, and watched late September ducks fly south in formation. I've said hello to curious seals, and watched striped bass flash beneath me in clear water. I've looked skyward and said to my friend Chris (who tragically passed away at a far too young age, and who's winter 5/4 wetsuit I still wear), "this one's for you, buddy".

So, what's that thing called? It's called a waveski.

- TB on the Water

        



               
           

Wednesday, February 8, 2017

Gear: Kayak Repairs That Last - 10 Tips for Maintaining Your Kayak

I got into kayaking many years ago, after paddling rented tour boats a couple times to make sure I liked it enough to buy one. I've always loved the ocean (see my post Why I Love the Ocean), and sea kayaking offered a new way to explore it. When I did buy my first sea kayak (a 17" foot Perception Eclipse), I bought it used, after the season, off one of the tour companies I previously paddled with. Since then, I've purchased other boats and gear on Craigslist (after having done a fair share of research online to know what I'm looking for). In short, I'm cheap. And, I like things that last - and that I can fix myself with materials that won't break the bank, and hopefully, won't break at all. 

For several years now, I've expanded my paddling to include surfing a late model plastic waveski (for those who don't know, it's a sit-on-top kayak with a planing hull and fins - specifically designed to surf waves (See my post What's That Thing Called?). I was able to pick up a barely used Walden (the original/defunct Massachusetts brand, not the current brand) "Milo" model on Craigslist. It's banana yellow, which really makes me stand out in the lineup, but at least they can see me coming😏 Surf conditions have added additional stress to materials and gear, and have taught me a lot that is transferable to flat water paddling (and sometimes the ocean can be anything but flat). I've also had the excellent advice of Joel at New England Small Craft (sadly, now out of business) to help with ideas and gear. I've often gone my own way with repairs, but his input has been appreciated. 
Walden "Milo" waveski
Here's a few things I've learned:

1. Store your gear out of the sun. I can't count how many times I've seen kayaks and related gear left outside to bake in the sun. The sun will deteriorate plastic boats over time, and, maybe more importantly, won't do the nylon fixtures on your boat any good. True, you'll be paddling in the sun, but when you're out of the water, wash your gear off and store everything in a cool, dark, dry place (or as close as you can get to that). If you have to leave your boat outside, put it up on a couple of saw horses with a tarp over it.

2. Nylon fixtures WILL break. It is inevitable. Repeated stress will cause nylon pad eyes (where you typically clip or tie lines), nylon slides (the buckle-like rectangular pieces used to adjust straps/webbing), and even the threaded rings (that you screw your deck hatch covers into) to fail. I have had all of these break - and mostly at inconvenient (to say the least) times. I remember calling Surf to Summit to complain about a slide breaking on their thigh straps for the second time, and being told "that's the first we've heard of that". I didn't believe it and neither should you. All manufacturers use nylon - so either keep extra fixtures and a screw driver on hand, or consider better materials. In my opinion, nylon fixtures are simply under-engineered to save on cost.

3. Better materials exist. There are 2 types of metal that can withstand salt water conditions without rusting/rotting quickly: brass and 316 stainless steel (not 3/16 stainless steel - that's a size, not a type. If anyone you speak with doesn't know the difference, walk away or hang up). Brass has historically been used in marine environments, and 316 stainless resists pitting and corrosion. I have sourced 316 stainless pad eyes on eBay and brass slides GET THEM HERE for webbing at STRAPWORKS. Sometimes, especially if you live near a harbor town, your local hardware store will carry brass, but less often 316 stainless steel. Bring your original nylon pieces with you, and match them for the right size. And don't forget your screws should be the same metal type, or they'll rust - save and reuse the originals if you can. The additional cost of metal over nylon is marginal, and I have not had one metal piece break yet.   


316 Stainless steel pad eye (plus some seaweed)
Brass slides used to replace nylon buckles

4. Webbing (straps) wears like steel. So long as your webbing hasn't been cut or frayed at the edges (and sometimes even if it has), it will last. Just wash it out with fresh water and store it out of the sun.  

5. Some things just have to be replaced over time. Drain plugs have a rubber gasket ring that helps to keep them water tight. These will eventually tear - especially if you over tighten your drain plug (so don't). They're cheap, available in the plumbing section of your local hardware store, and don't require tools to install. So, carry a couple extra with you.


Drain plug with gasket "O" ring
6. Consider repairs that will solve the problem long term. A couple years back, I bought a Heritage Sea Dart sit-on-top touring kayak from a seller on Craigslist. What he didn't tell me, and I couldn't assess when I bought it, was that the internal bulkheads were leaking. This condition trapped water inside the hollow middle section of the boat. I could have re-sealed the bulkheads, which were hard to reach. I could have drilled a few holes in them to let the water freely drain to the front or back compartments. What I chose to do, instead, was to install a drain plug in the top deck over the middle compartment. I located it at the highest point I could, which would be the lowest point when the boat was turned upside down. This way, I could drain any water that leaked through the bulkheads at any time, and I wouldn't have to re-seal them again, inevitably, in the future. The drain plug was cheap, and I just needed some sealant and a big enough drill bit to install it. As for any flotation lost by leaking bulkheads, I just bought dry bags with an air fill tube attached. Now, they would do double duty to store gear and be blown up to act as float bags fore and aft. Problem solved. 

7. When buying your boat, pick a material you're comfortable working with. I buy plastic boats - period. I know, they're heavier. I know, they don't perform like fiberglass or Kevlar. But, guess what - I don't care if I scratch them (and I do occasionally bump rocks), they're cheaper to buy, they're more plentiful used, and they're easy to work on. With the addition of some metal hardware, you could drop my boats out of a helicopter and they would be ready to go.

8. Be creative with repair solutions. My Sea Dart was molded with the weld line half way down the drain hole in the cockpit. I know this because I made the mistake of tightening straps (to hold the boat on my truck roof) too tight - this pulled the weld line apart, causing a small gap. This gap then leaked water into the hull while I was paddling along the rocky coast (why did my boat seem like it was trimming lower in the water? - duh). What to do, what to do. I could try to get the weld line re-sealed (but, it was still separated). I could patch it up with some sealant and maybe a tape of some sort. Then, it hit me - I could install some sort of ring just slightly narrower than the diameter of the drain hole. I went to the hardware store to research my options, starting in the plumbing aisle. There, I found a 6" plastic basin drain section that looked right, and it only cost a couple of bucks. When I tested it on the boat, the diameter was perfect. I cut it down to 4" so the drain plug could still fit at the top of the hole. Then, I roughed it up with sand paper, covered it liberally with sealant, and gently tapped it into place with a hammer. It pushed the weld line back together and fit like a glove - and it sits there today without issue. Creative thinking solved a problem and saved me a lot of money. 

9. Listen to professional advice, but be skeptical. Well intentioned folks might offer a solution to your problem that is more than you want to pay for, or seems like you'll just have to repeat at some point in the future. If you're like me, and you'd rather spend your time in/on the water than waiting for a repair to be completed, then use my suggestions above to avoid issues, and to fix them when they occur. There are thousands of solutions I haven't thought of, and you might just be the one to come up with the next one. But in the end, if you have to get a pro. to do a repair, ask if you can watch. If there's a next time, you might be able to do it yourself.

10. Have fun with your repairs. The challenge of coming up with a low cost, functional solution can be a fun puzzle to crack. The satisfaction of creating an elegant solution can make your next paddling adventure a greater pleasure - because you know your boat much better than before. Plus, now you legitimately have a custom boat. After all, how many Sea Darts have a basin drain pipe fitted into the cockpit drain hole? - mine does.  

- TB on the Water 

Follow up:

Per request of Tom at Top Kayaker, here are some pics of the fins on my Walden Milo Waveski. They are set up in a sort of thruster/tri-fin arrangement, and aren't in fin boxes, so they can't be moved, unfortunately. For the most part, though, they keep the back end from sliding out - them and some paddle technique.





Thanks for the question, Tom!